APPEARANCE
INITIAL SEALING TEMPERATURE
TREATMENT / METALLIZATION
THICKNESS / GRAMMAGE
DIFFERENTIATION
APPEARANCE
TREATMENT / METALLIZATION
THICKNESS / GRAMMAGE
DIFFERENTIATION
APPLICATION
| T | Transparent |
| MAT | Matte |
| M | Metallized |
| MW | Metallized White |
| OW | Opaque White |
| SP | Synthetic Paper |
| W | White |
| S | 105ºC on the untreated surface |
| D | 105ºC only on one surface |
| TT | 113ºC on the treated surface |
| SH | 115ºC on the untreated surface |
| 595 | 95ºC on the untreated surface |
| 580 | 80ºC on the untreated surface |
| E | Treatment or metallization on the outer surface |
| I | Treatment or metallization on the inner surface |
| D | Treatment on both surfaces or treatment on the internal surface and metallization on the outer surface |
| DI | Treatment on the outer surface and metallization on the inner surface |
| Thickness | Thickness in micron, used for transparent, matte and metallized films |
| Grammage | Expressed in g/m², used for metallized white, opaque and white films |
| AF | Anti-fog |
| B | Medium steam barrier |
| E | Shrinkable |
| EZ | “Easy open” seal |
| F | Fold retention |
| G | Gloss |
| HB | High steam barrier |
| HP | High performance seal |
| HS | High slip |
| JR | Non-stick |
| LD | Low density |
| LS | Low slip |
| NM | Controlled slip |
| CS | Cold Seal |
| CSR | Demolding agent for cold seal |
| DT | Dating (expiry date) |
| EL | Extrusion lamination |
| IML | In-mold labels |
| GL | Self-adhesive tag liner |
| LB ou LBP | Wrap around labels |
| MZ | Pre-cut labels |
| NM | Controlled slip |
| PA | Paste |
| PS | Self-adhesive tag |
| PSP | Platinum based self-adhesive tag |
| RW | Ream |
| TA | Adhesive Tape |
| TB | Tobacco |
| WL | Lamination with adhesive |
| WR | Overwrap |
| YM | Yerba mate |